DBX 128
Dynamic Range Enhancer / Noise Reduction System (1981)
Description
How would you like to make copies of records that sound better than the original? With reduced noise, and with increased dynamic range? The one machine that can do all that is the DBX 128, which combines the dynamic range enhancement features of the 118 with the tape noise reduction features of the 122.
These two combined modes permit you to expand a recorded program, then DBX ll encode the expanded material, so you can easily fit it onto tape. When played in decoded form, you'll hear what you didn't hear on the original - the realism of louder louds and quieter quiets. Moreover, you hear a lot less of something else you heard on the original - annoying surface noise.
For example, suppose you expanded a 40dB dynamic range program by a factor of 1.5, which would result in a dynamic range of 60dB. You could then process it through the DBS II tape noise reduction section of the 128, which would reduce the dynamic range to 30dB. This allows you to place the program on tape above the noise level and below saturation. When decoded, the program would have a dynamic range of 60dB, the same as the expanded original.
The tape copy would have 50% more dynamic range than the record, plus the combined benefit of reduced surface noise from the original, due to expansion, with no audible noise added by the tape recording process.
Additional features include power on/off switch, pre/post switches so you can expand material either before or after your tape recorder, in addition to DBX encoded disc playback capability. This provides you with complete front panel flexibility.
Specifications
Channels: 2
Input sensitivity: 300mV
Output level: 7V (max)
Noise reduction system: dbx II
S/N improvement: 30-40dB (dbx II)
Dynamic range: 110dB
Frequency response: 20Hz to 20kHz
Signal to noise ratio: 85dB
Total harmonic distortion: 0.5%
Dimensions: 95 x 279 x 260mm
Weight: 3.6kg
